Location

Alemania

Description

Vertical CNC machining center - 5-axis. "Chiron" FZ 08K S Magnum SK 5-axis vertical CNC machining center

Manufacturer: Chiron Model: FZ 08K S Magnum SK Year: 2007–2017 Notes: Vertical CNC machining center - 5 axes General overview: Factory reconditioned in 2017 Operating hours: approx. 22,500 h With NC swivel head, rotary table, bar feeder, and unloading system Control and CNC system: CNC control: Siemens 840D NC swivel head Swivel range: -20° / +115° Main spindle: Type: Water-cooled motorized spindle Maximum speed: 15,000 rpm Working strokes: X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Speeds: Rapid traverse: X / Y / Z: 75 m/min Acceleration: X: 1 g. Y: 1.5 g. Z: 2 g Tool changer: Number of tools: 40 positions Taper type: HSK-A40 Tool-to-tool change time: 2.6 seconds (vertical) Additional equipment: ·Bar machining capability ·AWU 160 rotary table ·Rotary table diameter: 105 mm ·Additional positioning axis ·Hainbuch Spanntop D100 collet chuck ·Additional device for machining the sixth face ·Automatic system for removing and evacuating finished parts ·IRCO SiMag 100.1-3000 bar feeder for round and profiled material ·Flushing gun ·Preparation for internal tool cooling (IKZ) · 70 bar high-pressure system with Varioventil valve · Tool holder washing · Scraper belt-type chip conveyor · Chip discharge height: 1050 mm · VRF 400-liter rotary vacuum filter by KNOLL · MAHLE switched dual filter · Electrical cabinet cooler ·Illuminated signal tower ·Tool life monitoring ·Single F500 tool breakage control ·Renishaw TS27R 3D touch probe system ·Brankamp Marposs CMS 100 collision monitoring system Included accessories: ·Breuning IRCO guideway sets ·Hainbuch clamping collets (as agreed) ·Approximately 500 HSK-A40 tool holders ·Spare parts for this machine type ·Machine-specific consumables Production concept: The system is designed for 24/7 unmanned automated production of cubic parts. The material is fed via a bar feeder capable of handling bars up to 100 mm in diameter and 3000 mm in length, for both round and shaped stock. The rotary table acts as a positioning axis, allowing the four side faces to be machined using the vertical milling spindle. The fifth face is machined horizontally using the swivel head. The part is then cut, rotated 180°, and the sixth face is machined using the tilting head as well. Finished parts are automatically removed via a handling system and deposited into a parts storage area. Machine condition: ·General overhaul performed by the manufacturer in 2017 ·Last spindle replacement performed in September 2025 ·Last full annual maintenance performed in October 2025 ·The machine has been continuously maintained by the manufacturer under a full-service contract, including preventive maintenance and technical updates.